高純氫氣發生器   大流量氫氣發生器
型號:G80132
氫氣發生器是SPE技術電解純水（杜絕加堿）制取高純氫氣的一類輕型、高效、節能、環保類高科技產品。
核心技術：該儀器的核心SPE電極是由復合催化劑與離子膜合為一體形成的高活性零極距催化電極，電解
效率高；其他主要部件均由優質高檔工程塑料模具成型；有完善的電氣控制系統。整機設計*，質量可靠，自動化程度高，產氫純度高，輸出流量大，型號、規格齊全，應用范圍廣。
工作原理 把滿足要求的電解水（電阻率大于1MΩ/cm，電子或分析行業用的去離子水或二次蒸餾水皆可）送入電解槽陽極室，通電后水便立刻在陽極分解：2H2O=4H++ 2O-2，分解成的負氧離子（O-2），隨即在陽極放出電子，形成氧氣（O2），從陽極室排出，攜帶部份水進入水槽，水可循環使用，氧氣從水槽上蓋小孔放入大氣。氫質子以水合離子（H+•XH2O）的形式，在電場力的作用下，通過SPE離子膜，到達陰極吸收電子形成氫氣，從陰極室排出后，進入氣水分離器，在此除去從電解槽攜帶出的大部分水份，含微量水份的氫氣再經干燥器吸濕后，純度便達到99.999%以上。
該產品對于大氣量高純氫的場合均可使用，可為多臺氣象色譜儀供氣源，為吸氫合金充氫，及實驗室加氫，還原焰，還原氣體保護，太陽能，風能發電儲能等使用。
主要技術參數
氫氣純度：99.999%
氫氣流量：0～5050ml/min
輸出壓力：0.02～0.4Mpa（穩壓輸出）
水槽體積（L）：6.4
反應用水量（g/h）：96.43
水質要求：水的電阻率≥1MΩ/cm
電源電壓：220V±15% 110V±15% 50/60Hz
輸入功率：<2500W
外形尺寸：500×445×845mm
重量：約60kg
Pure hydrogen gas generator hydrogen generator of high purity hydrogen generator and large flux
Model: G80132
Hydrogen generator is electrolytic pure water (to eliminate alkaline) SPE technology for making high purity hydrogen of lightweight, high efficiency, energy saving, environmental protection type high-tech patent products.
Core technology: the equipment is the core of SPE electrode is formed by composite catalyst and ionic membrane is an organic whole to highly active zero polar distance of catalytic electrode, electrolyte
High efficiency; The other major components of all by the high quality engineering plastic molding; Have a complete electrical control system. The machine design is advanced, reliable quality, high automation, high purity hydrogen production, output flow, model, complete specifications, wide application range.
Works to meet the requirements of electrolysis of water (resistivity is greater than 1 m Ω/cm, electronic industry or analysis with deionized water or secondary distilled water are available) into electrolytic cell anode chamber, water immediay after the power supply at the anode decomposition: 2 h2o + + 2 = 4 h O - 2, into the negative oxygen ion (O - 2), then at the anode emit electrons, the formation of oxygen (O2), discharge from the anode chamber, carrying water into water tank, water can be recycled, oxygen from the water tank cover holes into the atmosphere. Hydrogen protons in the form of hydrate ions (H + • XH2O), under the action of electric field force, by SPE, ionic membrane to the cathode absorption electronic form hydrogen, after discharge from the cathode chamber, in the gas water separator, the removed from the cell to carry out most of the water, hydrogen containing trace water by the dryer again after moisture absorption, the purity was above 99.999%.
The product can be used for large volume high purity hydrogen occasions, but multiple weather chromatograph for gas source, for hydrogen alloy hydrogen absorption, and lab hydrogenation, reducing flame, reductive gas, solar energy, wind energy storage, etc.
The main technical parameters
Hydrogen purity: 99.999%
The hydrogen flow rate: 0 ~ 5050 ml/min
Output pressure: 0.02 ~ 0.4 Mpa (voltage output)
Tank volume (L) : 6.4
The reaction of water (g/h) : 96.43
Quality requirement: water resistivity of 1 m or more Ω/cm
The power supply voltage: 220 v + 15% to 110 v + 15% 50/60 hz
The input power: < 2500 w
Dimension: 500 * 445 * 845 mm
About 60 kg weight:
型號:G80132
氫氣發生器是SPE技術電解純水（杜絕加堿）制取高純氫氣的一類輕型、高效、節能、環保類高科技產品。
核心技術：該儀器的核心SPE電極是由復合催化劑與離子膜合為一體形成的高活性零極距催化電極，電解
效率高；其他主要部件均由優質高檔工程塑料模具成型；有完善的電氣控制系統。整機設計*，質量可靠，自動化程度高，產氫純度高，輸出流量大，型號、規格齊全，應用范圍廣。
工作原理 把滿足要求的電解水（電阻率大于1MΩ/cm，電子或分析行業用的去離子水或二次蒸餾水皆可）送入電解槽陽極室，通電后水便立刻在陽極分解：2H2O=4H++ 2O-2，分解成的負氧離子（O-2），隨即在陽極放出電子，形成氧氣（O2），從陽極室排出，攜帶部份水進入水槽，水可循環使用，氧氣從水槽上蓋小孔放入大氣。氫質子以水合離子（H+•XH2O）的形式，在電場力的作用下，通過SPE離子膜，到達陰極吸收電子形成氫氣，從陰極室排出后，進入氣水分離器，在此除去從電解槽攜帶出的大部分水份，含微量水份的氫氣再經干燥器吸濕后，純度便達到99.999%以上。
該產品對于大氣量高純氫的場合均可使用，可為多臺氣象色譜儀供氣源，為吸氫合金充氫，及實驗室加氫，還原焰，還原氣體保護，太陽能，風能發電儲能等使用。
主要技術參數
氫氣純度：99.999%
氫氣流量：0～5050ml/min
輸出壓力：0.02～0.4Mpa（穩壓輸出）
水槽體積（L）：6.4
反應用水量（g/h）：96.43
水質要求：水的電阻率≥1MΩ/cm
電源電壓：220V±15% 110V±15% 50/60Hz
輸入功率：<2500W
外形尺寸：500×445×845mm
重量：約60kg
Pure hydrogen gas generator hydrogen generator of high purity hydrogen generator and large flux
Model: G80132
Hydrogen generator is electrolytic pure water (to eliminate alkaline) SPE technology for making high purity hydrogen of lightweight, high efficiency, energy saving, environmental protection type high-tech patent products.
Core technology: the equipment is the core of SPE electrode is formed by composite catalyst and ionic membrane is an organic whole to highly active zero polar distance of catalytic electrode, electrolyte
High efficiency; The other major components of all by the high quality engineering plastic molding; Have a complete electrical control system. The machine design is advanced, reliable quality, high automation, high purity hydrogen production, output flow, model, complete specifications, wide application range.
Works to meet the requirements of electrolysis of water (resistivity is greater than 1 m Ω/cm, electronic industry or analysis with deionized water or secondary distilled water are available) into electrolytic cell anode chamber, water immediay after the power supply at the anode decomposition: 2 h2o + + 2 = 4 h O - 2, into the negative oxygen ion (O - 2), then at the anode emit electrons, the formation of oxygen (O2), discharge from the anode chamber, carrying water into water tank, water can be recycled, oxygen from the water tank cover holes into the atmosphere. Hydrogen protons in the form of hydrate ions (H + • XH2O), under the action of electric field force, by SPE, ionic membrane to the cathode absorption electronic form hydrogen, after discharge from the cathode chamber, in the gas water separator, the removed from the cell to carry out most of the water, hydrogen containing trace water by the dryer again after moisture absorption, the purity was above 99.999%.
The product can be used for large volume high purity hydrogen occasions, but multiple weather chromatograph for gas source, for hydrogen alloy hydrogen absorption, and lab hydrogenation, reducing flame, reductive gas, solar energy, wind energy storage, etc.
The main technical parameters
Hydrogen purity: 99.999%
The hydrogen flow rate: 0 ~ 5050 ml/min
Output pressure: 0.02 ~ 0.4 Mpa (voltage output)
Tank volume (L) : 6.4
The reaction of water (g/h) : 96.43
Quality requirement: water resistivity of 1 m or more Ω/cm
The power supply voltage: 220 v + 15% to 110 v + 15% 50/60 hz
The input power: < 2500 w
Dimension: 500 * 445 * 845 mm
About 60 kg weight: