GDS-3152 | GDS-3154 | GDS-3252 | GDS-3254 | GDS-3352 | GDS-3354 | |
Vertical | ||||||
Input Channels | 2Ch+EXT | 4Ch+EXT | 2Ch+EXT | 4Ch+EXT | 2Ch+EXT | 4Ch+EXT |
Bandwidth | DC~150MHz(-3dB) | DC~250MHz(-3dB) | DC~350MHz(-3dB) | |||
Rise Time | 2.3ns | 1.4ns | 1ns | |||
Vertical Resolution | 8 bits | |||||
Vertical Resolution@ 1MΩ | 2mV~5V/div | |||||
Vertical Resolution@ 50/75Ω | 2mV~1V/div | |||||
Input Coupling | AC, DC, GND | |||||
Input Impedance | 1MΩ// 16pF | |||||
DC Gain Accuracy | ±(3% X |reading| + 0.1div+ 1mV) | |||||
Polarity | Normal and inverted | |||||
Maximum Input Impedance @1MΩ | 300V (DC+AC peak), CAT I | |||||
Maximum Input Impedance @50/75Ω | 5 Vrms ,CAT I | |||||
OffsetPositionRange | 2mV/div ~ 100mV/div: ±0.5V 200mV/div ~ 5V/div: ±25V | |||||
Bandwidth Limit | 20MHz (-3dB) | 100MHz (-3dB) | 200MHz (-3dB) | |||
Waveform Signal Processing | Addition, Subtraction, multiplication, division, FFT, FFTrms | |||||
Trigger | ||||||
Source | Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext | |||||
Trigger Mode | Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single | |||||
Trigger Type | Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART | |||||
TriggerHold-off Range | 10ns~10s | |||||
Coupling | AC, DC, LF rej, HF rej, Noise rej | |||||
Sensitivity | DC~50MHz approx. 1div or 1.0mV 50MHz~150MHz approx. 1.5div or 15mV 150MHz~350MHz approx. 2div or 20mV | |||||
EXT Trigger | ||||||
Range | ±15V | |||||
Sensitivity | DC~150MHz pprox.100mV 150MHz~250MHz approx. 150mV 250MHz~350MHz approx. 150mV | |||||
Input Impedance | 1MΩ±3%, ~16pF | |||||
Horizontal | ||||||
Range | 1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div | |||||
Pre-Trigger | 10div maximum | |||||
Post-Trigger | 1,000div | |||||
Accuracy | ±20 ppm over any ≧1 ms time interval | |||||
Signal Acquisition System | ||||||
Real Time Sample Rate | 2.5GSa/s | 5GSa/s | 2.5GSa/s | 5GSa/s | 5GSa/s | 5GSa/s |
Equivalent Time Sample Rate | 100GSa/s maximum for all models | |||||
Record Length | 25k points | |||||
Acquisition Mode | Normal, Average, Peak Detect, High resolution, Single | |||||
Normal: Acquire sampled values | ||||||
Average: From 2 to 256 waveforms included in average | ||||||
Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds | ||||||
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution | ||||||
X-Y Mode | ||||||
X-axis input | Channel 1; Channel 3 | |||||
Y-axis input | Channel 2; Channel 4 | |||||
Phase Shift | ±3° at 100kHz | |||||
Cursors and Measurement | ||||||
Cursors | Amplitude, Time, Gating available | |||||
Automatic Measurement | 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF) | |||||
Cursors Measurement | ?V, ?T | |||||
Auto Counter | 6digits, range from 2Hz minimum to the rated bandwidth | |||||
Power Measurements (optional) | ||||||
Power Quality Measurements | VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle. | |||||
Harmonics | Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS | |||||
Ripple Measurements | Vripple, Iripple | |||||
In-rush Current | First peak, second peak | |||||
Control Panel Functions | ||||||
Autoset | Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset | |||||
Auto-Range | Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point | |||||
Save Setup | 20 sets | |||||
Save Waveform | 24 sets | |||||
Display System | ||||||
TFT LCD | 8" TFT LCD SVGA color display (LED backlight) | |||||
Display Resolution | 800 horizontal × 600 vertical (SVGA) | |||||
Interpolation | Sin(x)/x and equivalent time sampling | |||||
Waveform Display | Dots, Vectors, Variable persistence, infinite persistence | |||||
Display Graticule | 8 x 10 divisions | |||||
Display Brightness | Adjustable | |||||
Interface | ||||||
RS-232C port | DB-9port | |||||
USB port | 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port | |||||
Ethernet | RJ-45 port, 10/100Mbps | |||||
VGAVideoPort | DB-15port, SVGA monitor output | |||||
Line Output | 3.5mm stereo output jack for Go/NoGo audio alarm | |||||
GPIB(Optional) | USB to GPIB converter | |||||
Go/NoGo BNC | Maximum 5V /10mA TTL open collector ouput | |||||
Kensington Style Lock | Rear panel security slot connects to standard Kensington style lock | |||||
Power Source | ||||||
LineVoltageRange | AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection | |||||
Miscellaneous | ||||||
Multi-language Menu | Available | |||||
On-line Help | Available | |||||
Time clock | Time and Data ,Provide the Data/Time for saved data | |||||
Dimensions and Weight | 400(W) x 200(H) x 130(D), approx. 4 kg. |
使用手冊一本,電源線一條
GTP-151R: 150MHz(10:1/1:1) 可切換被動探棒,用於GDS-3152/ 3154 (一通道一條)
GTP-251R: 250MHz(10:1/1:1) 可切換被動探棒,用於GDS-3252/ 3254 (一通道一條)
GTP-351R: 350MHz(10:1/1:1) 可切換被動探棒,用於GDS-3252/ 3254 (一通道一條)
選購配件
GTC-001 | 設備車,450(W) x 430(D)mm (120V 輸入插座) |
GTC-002 | 設備車,330(W) x 430(D)mm (120V 輸入插座) |
GTL-110 | 測試導線,BNC至BNC接頭導線 |
GTL-232 | RS-232C纜線,9-pin母接口對9-pin母接口,Null Modem for computer |
GTL-242 | USB 1.1纜線,A-B 型,4P,1800mm |
插動探棒 | GDP-025: 25MHz 高電壓插動探棒 GDP-050: 50MHz 高電壓插動探棒 GDP-100: 100MHz 高電壓插動探棒 |
電流探棒 | GCP-530: 50MHz/ 30A 電流探棒 GCP-1030: 100MHz/ 30A 電流探棒 GCP-206P: 電源供應器以支援電流探棒 (2個輸入通道) GCP-425P: 電源供應器以支援電流探棒 (4個輸入通道) |