Programmable 2-Channel Heating雙通道加熱

Programmable 2-Channel Heating雙通道加熱

可編程雙通道加熱

控制器，精度高穩定性，低

電噪聲，帶數字RS232接口，

TC2-80-150型

提供一些敏感應用、納米/壓電定位、共焦或

例如AFM成像。通過圖形控制操作穩定，使用方便的靈活控制

觸摸屏。可用于客觀加熱器和灌注系統。大多數加熱階段的工作原理是

在線溶液預熱器。自調整：不需要手動調整，以提供穩定的運行。

可通過觸摸屏編程產生斜坡和溫度階躍，超過40分鐘

每次10秒。

•高穩定性，0.01°C，無漂移。

•成像和記錄期間無振動-無內部風扇。

•范圍為-80至150°C，精度為0.1°C。

•自整定，無需調整。

•多個溫度傳感器可選擇用于反饋、舞臺和浴室。

•外部探頭采用塑料封裝：沒有金屬離子泄漏到溶液中

•內置過熱保護。

•編程溫度變化輸入。

•用于監測和設置溫度的模擬和數字輸出。

•用于軟件控制的數字接口。

•無電噪音-適用于電生理學。

•范圍：高達150°C

•穩定性：0.01°C

•尺寸：8x1.8x11.5英寸。

•溫度探頭：

微型0.87mm厚（適合小體積

密室）

•設置：自我調節以穩定溫度

不同樣品體積和加熱

舞臺尺寸，無手動調整

必修的

•反饋：來自舞臺（內置）或外部

探頭（槽）

•輸出：每通道4A，140W（35V

輸入）

 Programmable 2-Channel Heating
Controller, precision high stability, low
electrical noise, with digital RS232 interface,
TC2-80-150
Provides higher stability required for some sensitive applications, nano/piezo positioning, confocal or
AFM imaging for example. Flexible controls for stable operation and easy to use through the graphical
touch-screen. Can be used with objective heaters and with perfusion systems. Most heating stages work as
inline solution pre-heaters. Self-tuning: does not require manual adjustments to provide stable operation.
Can be programmed through the touch screen to generate ramps and temperature steps, longer than 40min
each, 10sec min.
• No drift due to high stability, 0.01°C.
• No vibrations during imaging and recording - no internal fan.
• Range from -80 to 150°C with accuracy 0.1°C.
• Self-tuning, no adjustments are required.
• Multiple temperature sensors to choose for feedback, STAGE and BATH.
• External probes are plastic-encapsulated: no metal ions leakage into solutions
• Built-in overheating protection.
• Inputs for programmed temperature changes.
• Analog and Digital Outputs to monitor and SET temperature.
• Digital interface for software control.
• No electrical noise - suitable for electrophysiology.
• Range: up to 150°C
• Stability: 0.01°C
• Dimensions: 8x1.8x11.5in.
• Temperature probe:
miniature 0.87mm thick (fits small volume
chambers)
• Settings: Self-tuning to stabilize temperature
of different sample volumes and heating
stage sizes, no manual adjustments are
required
• Feedback: from Stage (built-in) or External
probe (Bath)
• Output: 4A per channel, 140W (with 35V
input)

 注：楊清辰發布