Multi-Channel Systems多通道系統
多通道系統控制和處理樣品

計算機化的設置/機器人以小體積操作環境-例如，圍繞活樣本。

微型尺寸允許您直接在顯微鏡臺上處理樣品。既然你不必

從顯微鏡階段取出樣品，這可用于在

比如在治療后。可用于任何電池室，包括LabTek室

Nunc和多孔板的護目鏡。小2通道配置包括2通道

溶液處理單元和8通道溶液開關可混合多達8種不同的溶液。

Multi-Channel Systems多通道系統

Multi-Channel Systems多通道系統

多通道系統控制和處理樣品

計算機化的設置/機器人以小體積操作環境-例如，圍繞活樣本。

微型尺寸允許您直接在顯微鏡臺上處理樣品。既然你不必

從顯微鏡階段取出樣品，這可用于在

比如在治療后。可用于任何電池室，包括LabTek室

Nunc和多孔板的護目鏡。小2通道配置包括2通道

溶液處理單元和8通道溶液開關可混合多達8種不同的溶液。系統

可進行配置，以確保關鍵成分/試劑之間沒有污染。隨附

安裝在新的戴爾筆記本電腦上的控制軟件。可以為任何協議預先編程，

包括細胞染色和標記。溫度和氣體環境控制系統

可用。

Multi-Channel Systems to Control and Process Samples This is a
computerized setup/robot to manipulate environment in small volumes - around live samples, for example.
The miniature size allows you to process samples directly on microscope stages. Since you do not have to
remove samples from the microscope stage, this can be used to relate live and processed samples before
and after treatment, for example. Can be used with any cell chambers, including LabTek chambered
coverglasses from Nunc and multi-well plates. The minimum 2-channel configuration includes 2-channel
solution handling unit and 8-channel solution switch to mix up to eight different solutions. The system
can be configured so that there is no contamination between critical components/reagents. Shipped with
control software installed on a new Dell laptop/notebook computer. Can be preprogrammed for any protocol,
including cell staining and labeling. Systems with temperature and gas environment control are also
available.

 注：楊清辰發布