技術文章
測量應用案例-20190603
閱讀:248 發布時間:2019-6-17
作者: Mohamad Shurair; Fares Almomani; Rahul Bhosale; Majeda Khraisheh; Hazim Qiblawey
Department of Chemical Engineering, College of Engineering, Qatar University, P. O. Box 2713, Doha, Qatar
摘要:Quick algae harvesting methodologies relating optimum flocculent dose (DOpt.), percentage harvesting efficiency (%HE) and percentage water recovery (%WRecovery) to the in-situ hydrodynamic properties of water-algae systems are presented. Flocculation of three microalgae in single and sequential steps, using chemical (polymer and ferric chloride) and biological (egg shells) flocculants, was studied. Zeta potential and pH analysis were completed to further understand the flocculation mechanism. Polymer at DOpt. of 7.0?g/kgDS resulted in WRecovery of 90% and %HE of 96.7%. Lower %HE (92.1), %WRecovery (79) and noticeable algal cells deformation was observed for ferric chloride at DOpt. of 7.0?g/kg DS. Bio-flocculant conserved algal structure and resulted in %HE of 96.2 and %WRecovery of 90 at DOpt. of 5.4?g/kgDS. Significant % HE of 99.8, %WRecovery of 99.8%, and up to 95% reduction in DOpt. were achieved in sequential flocculation. The results established the effectiveness and suitability of sequential/ bio-flocculation for algae harvesting.