技術文章
測量應用案例-20220404
閱讀:108 發布時間:2022-4-26文獻名: Carboxylated Cellulose Nanocrystals with Chiral Nematic Property from Cotton by Dicarboxylic Acid Hydrolysis
作者: Chunxiang Linabc,Beiqiu Chena,Yushi Liua,Yiting Chenb,Minghua Liua,J.Y Zhuc
a College of Environment & Resources, Fuzhou University, Fuzhou, 350108, China
b Fujian Provincial University Engineering Research Center of Green Materials and Chemical Engineering (Minjiang University), Fuzhou, 350108, China
c Forest Products Laboratory, U.S. Department of Agriculture, Forest Service, Madison, WI, 53726, USA
摘要:Carboxylated cellulose nanocrystals (CNCs) were produced from cotton linter using a mixture of a dicarboxylic acid (maleic acid or succinic acid) and its corresponding anhydride with or without catalyst in acetic acid as solvent. The low solubilities of these dicarboxylic acids can ease chemical recovery and decrease environmental impact (especailly maleic acid is a U.S. FDA approved indirect food additive (21CFR175-177)) and capital costs compared with the conventional concentrated sulfuric acid hydrolysis for producing CNCs. The dicarboxylic-acid-produced CNCs (DC-CNCs) contained surface carboxyl groups of approximately 0.5?mmol/g, with ranges of dimensions of 50–150?nm in diameter and 50–700?nm in length. Birefringence was observed in the DC-CNC suspensions above critical concentrations. However, fingerprint texture was only observed in the DC-CNC suspensions produced with catalyst p-toluenesulfonic acid. Scanning electron microscopy images of the cross section of DC-CNC films revealed a periodic ordered multilayer structure. DC-CNCs were also produced using recycled dicarboxylic acids.
關鍵詞:Cellulose nanocrystals,Dicarboxylic acid hydrolysis,Chiral nematic,Birefringence