SMC速度控制閥,80-AS1001F-04
SMC速度控制閥通常,在節流、調節控制與泥漿介質中,要求結構長度短,啟閉速度快(1/4轉)。低壓截止(壓差小),推薦選用SMC帶先導式單向閥的速度控制閥。
SMC速度控制閥在雙位調節、縮口地通道、低噪聲、有氣穴和氣化現象,向大氣少量滲漏,具有磨蝕性介質時,可以選用蝶閥。
SMC速度控制閥,80-AS1001F-04
SMC速度控制閥通常,在節流、調節控制與泥漿介質中,要求結構長度短,啟閉速度快(1/4轉)。低壓截止(壓差小),推薦選用SMC帶先導式單向閥的速度控制閥。
SMC速度控制閥在雙位調節、縮口地通道、低噪聲、有氣穴和氣化現象,向大氣少量滲漏,具有磨蝕性介質時,可以選用蝶閥。
在特殊工況條件下節流調節,或要求密封嚴格,或磨損嚴重、低溫(深冷)等工況條件下使用蝶閥時,需使用特殊設計金屬密封帶調節裝置地三偏心或雙偏心地蝶閥。
SMC速度控制閥,80-AS1001F-04
?采用按壓鎖定式,針縮的操作性提高。
?手輪加大。
?管子拆裝性提高。
插入力zui多減小30%(8N)。
脫離力zui多減小20%(5N)。※
※管子的抗拉拔強度與現行品相同。
?無電解鍍鎳規格已標準化。。
?可360°/自由配管(萬向型)。
1. Perform maintenance and inspection according
to the procedures indicated in the
operation manual.
If handled improperly, malfunction or damage of machinery
and equipment may occur.
2. Maintenance work
If handled improperly, compressed air can be dangerous.
Assembly, handling, repair, and element replacement of
pneumatic systems should be performed by a knowledgeable
and experienced person.
3. Drain flushing
Remove drainage from air filters regularly.
4. Removal of equipment, and supply/exhaust
of compressed air
Before components are removed, first confirm that measures
are in place to prevent workpieces from dropping, run-away
equipment, etc. Then, cut off the supply pressure and electric
power, and exhaust all compressed air from the system using
the residual pressure release function.
When machinery is restarted, proceed with caution after
confirming that appropriate measures are in place to prevent
sudden movement.
80-AS1001F-04
80-AS1201F-M304
80-AS1201F-M504
80-AS1201F-M506
80-AS1201FMM504
80-AS1211F-M504
80-AS1301F-M504
80-AS1301F-M506
80-AS1311F-M504
80-AS2201F0104S
80-AS2201F0106S
80-AS2201F0206S
80-AS2201F0208S
80-AS2301F0206S
80-AS3000-03
80-AS3201F0312S
80-AS4000-04
:蔣美麗
3269187186
: 3269187186
:0769—33510282
0769—23836321全國供貨地區,歡迎訂購!!!
我司優勢品牌:
德國寶德burkert電磁閥,德國festo費斯托氣動元件
日本品牌:日本SMC氣動元件,日本CKD喜開理氣動元件,日本小金井氣動元件