DPG1000ADA-100G-2N壓力表 美國omega
【簡單介紹】
品牌 | OMEGA/美國 |
---|
【詳細說明】
DPG1000ADA-100G-2N壓力表 美國omega
報警裝置和模擬輸出功能的數字壓力計
DPG1000ADA_DPG1000DAR系列
DPG1000ADA_DPG1000DAR 系列:報警裝置和模擬輸出功能的數字壓力計
DPG1000ADA-15G-1N
AD or DC Powered with Dual Alarms
DC Powered with Dual Alarms and Analog Output
Ranges between 15 psi and 3000 psi
Normal or Reverse Acting Alarms
Hi/Lo, Hi/Hi, or Lo/Lo Alarms available
Colored LED Alarm Status Indicators
Using the DPG1000ADA and DPG1000DAR Alarm Outputs Normal (Fail-safe) vs. Reverse Action—The convention for alarm action is that with the normal or fail-safe configuration, the alarm output relays will be CLOSED (relay energized) for a clear or non-alarm condition and OPEN (relay not energized) for an alarm condition. This is primarily for users who require an alarm condition if the gauge loses power or suffers a catastrophic failure. In the wiring diagrams, the normally closed and normally open designations refer to standard relay terminology (i.e., the relay contact status with the relay coil not energized). Therefore, with the normal (fail-safe) configuration in a green or non-alarm condition, the relay will be energized so that continuity can be expected between the common and normally open leads. In a red or alarm condition, the relay will be open (not energized) so that continuity can be expected between the common and normally closed leads.
Contact Rating and Protection The contacts of the alarm relays are rated at 1 A/24 Vdc or 0.5 A/ 115 Vac. Switching loads greater than the rating, or switching large inductive loads, will shorten the useful life of the contacts. In lowlevel switching or with dry contacts, the user should consider whether external contact protection, such as snubber networks or arc suppression networks, is required to protect the contacts. In addition, no internal fusing is included in the DPG1000 contact circuits. The circuit external to the gauge alarm outputs should be fused by the user in applications in which good design dictates this practice.
Using the DPG1000DAR Analog Output The analog output is easy to use if a few system considerations are observed. The DPG1000DAR is DC powered, with the gauge power supply (–) tied to the 4 to 20 mA (–). Therefore, the DC supply (–) lead should be considered common with regard to the analog output (–) or ground connection in the user’s system. Be sure to observe the output compliance (voltage drive) capabilities of the gauge. The compliance, and therefore the maximum loop resistance the output can drive, is a function of the supply voltage to the gauge. Consult the manual for maximum loop resistance vs. supply voltage. Too large a loop resistance will cause the gauge output to “l(fā)imit" or saturate before reaching its full 20 mA output.
DPG1000ADA AC/DC Powered with Dual Alarms
SPECIFICATIONS
Accuracy: ±0.25% FSO or better, ±1 least-significant digit (includes linearity, hysteresis, repeatability)
Controls and Location: Display zero/span, non-interactive, ±15% range; setpoint 1 and setpoint 2, 0 to 100% range; top-accessible, multiturn potentiometers
Alarm Deadbands (Hysteresis): 1% of FSO, standard
Alarm Outputs: Dual form “C" (SPDT) relay contacts; individual setpoint 1 and setpoint 2 settings via top-accessible multiturn potentiometers; high/low alarm configuration standard, others available; relay contacts rated 1 A/24 Vdc, 0.5 A/115 Vac, non-inductive
Alarm Indicators: Bicolor (red/green) LEDs on front panel
Test Function: Front-panel TEST button, when depressed, toggles both SP1 and SP2 alarm status, independent of pressure input, to allow testing of system operation
Alarm Response Time: 100 ms typical
Power: Any AC source of 8 to 24 Vac, 50/60 Hz, or any DC source of 9 to 32 Vdc, 1.0 W maximum; optional wall-mount power supply available to operate on 115 Vac (DPG1000-PS)
DPG1000DAR DC Powered with Dual Alarms and 4 to 20 mA Output
SPECIFICATIONS
Accuracy: ±0.25% FSO or better, ±1 least-significant digit (includes linearity, hysteresis, repeatability)
Controls and Location: Display zero/span, non-interactive, ±15% range; setpoint 1 and setpoint 2, 0 to 100% range; test calibration level, 0 to 100% range; top-accessible, multiturn potentiometers analog output zero/span; internal potentiometers
Alarm Deadbands (Hysteresis): 1% of FSO, standard
Alarm Outputs: Dual form “C" (SPDT) relay contacts; individual setpoint 1 and setpoint 2 settings via top-accessible multiturn potentiometers; high/low alarm configuration standard; relay contacts rated 1 A/24 Vdc, 0.5 A/115 Vac, non-inductive
Alarm Indicators: Bi-color (red/green) LEDs on front panel
Alarm Response Time: 100 ms typical
Analog Output: 4 to 20 mA DC; output drive (compliance) determined by power source
Analog Output Response Time: 50 ms, typical
Test Function: Front-panel TEST button, when depressed, toggles both SP1 and SP2 alarm status and simultaneously sets display and analog output to “calibration" level, independent of pressure input, to allow testing system operation
Power: Any DC source of 9 to 32 Vdc, 1.0 W max
Electrical Connection: 0.9 m (3') long, 4-conductor 22 AWG shielded cable for power and retransmitted output; 0.9 m (3') long, 6-conductor 22 AWG cable for alarm contacts
ALARMS (final siffix 1N standard)
1 = HI/LO (standard)
2= HI/HI
3= LO/LO
N = Normal Acting (standard)
R = Reverse Acting
Example: DPG1000ANA-15G-3R HAS LO/LO ALARMS, Reverse Acting
DPG1000ADA-100G-2N壓力表 美國omega
相關產品:相關產品
- WT4401-D臺式風道 美國omega
- PGU-15L-100PSI/7BAR壓力表 美國omega
- PGT-45B-100壓力表 美國omega
- PGR-45LSS-1500壓力表 美國omega
- PGP-25B-30V/60壓力表 美國omega
- PGH-45B-100壓力表 美國omega
- PGF-25B-60壓力表 美國omega
- PGD-45B-100壓差壓力表 美國omega
- 美國omega PCL1200便攜式高精度多功能校準器
- PCL1000壓力校準儀 美國omega
- PCL422A微型回路校準器 美國omega
- PCL341-030壓力校準器 美國omega
- PCL340-100手持壓力校準器 美國omega
- PCL240-300手持校準器 美國omega
- 美國omega PCL120回路校準器
- PCL-MB-015G臺式壓力校準 美國omega
- PCL-1B便攜式壓力校驗儀 美國omega
- HHP4205數顯壓力計 美國omega
- 美國oemga HHP886U壓差計
- HHP886W壓差計 美國oemga
- HHP91壓力表 美國omega
- DVG-64液晶顯示真空計 美國omega
- DVG-60電子真空指示器 美國omega
- DPGM409S15-001BCG數字壓力表 美國omega
- DPGM409-350HDWU數字壓力計 美國omega
- DPG9030-15壓力表 美國omega
- DPG7000-VAC/30壓力表 美國omega
- DPG5600B-500G-NS壓力表 美國omega
- DPG5500B-1KG-NS壓力表 美國omega
- DPG4000-30-KIT壓力校準模塊 美國omega
- DPG3600B-300G壓力表 美國omega
- DPG2001B-300G壓力表 美國omega
- DPG1100B-100G壓力表 美國omega
- DPG1001AD-400INH20G壓力表 美國omega
- DPG1000ADA-100G-2N壓力表 美國omega
- DPG1000B-2KG壓力表 美國omega
- DPG409S15-005V壓力表 美國omega
- DPGM409-050BDWU壓力表 美國omega
- DPG110壓力表 美國omega
- PGM-63L-60PSI/4BAR壓力表 美國omega
請輸入產品關鍵字:
郵編:518031
聯系人:趙先華
電話:0755-82768776,82736276
傳真:0755-83041664
手機:13823144468
留言:發送留言
個性化:www.xbtes.com
網址:www.xb5j.com
商鋪:http://www.om600.com/st98310/